Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Beware of spam emails telling that your account will be receiving Poker rewards.
Click HERE to know more about it.

How to Prevent Solar LED Street Lights from Dying?

xiuxiuxiuxiu Posts: 221Registered User Cupcake Princess

The light source of solar street light is basically using led light source. This kind of street light is also called solar led street light. However, in the process of use, we often encounter the situation that the LED is not bright. This is the dead light phenomenon of the Solar led street light(CLASSIC) https://www.classicledlight.com/product/led-solar-street-light/

.

There are two reasons for the death of the light. One is that the leakage current of the solar led street light is too large, causing the local dead light caused by the PN junction failure, and the whole light work is not affected. Second, the internal connection lead of the solar led street light is disconnected, resulting in LED No current is passed through and a dead light is generated, causing the whole light to not work properly. So how to avoid this phenomenon?

First, prevent static electricity

Static electricity is a very harmful devil for solar led street light. Any problem in one link will cause damage to the LED, making the LED performance deteriorate or even fail.

We know that the human body (ESD) static electricity can reach about three kilovolts, which can damage the LED chip. In the LED packaging production line, a scientific and standardized grounding design must be designed. Generally, the grounding resistance is required to be 4 ohms. The grounding resistance should even reach ≤ 2 ohms.

Second, try to use automatic welding equipment

If manual soldering is used, the soldering temperature must be strictly controlled. This is because manual soldering is used. If a normal soldering iron is used, the soldering iron temperature is above 300-400 °C. Excessive soldering temperature can also cause dead lights.

The solar led street light lead has a coefficient of expansion several times higher than the expansion coefficient at about 150 ° C. The internal gold wire solder joint will open the solder joint due to excessive thermal expansion and contraction, resulting in a dead light phenomenon.

If you are ready to upgrade to a more efficient lighting system, for more information, please click Led street lights Manufacturers https://www.classicledlight.com/

.

Sign In or Register to comment.