It looks like you're new here. If you want to get involved, click one of these buttons!
The complete set of Rice Grader(LIANGGONG) https://www.china-zjlg.com/product/rice-grader-machine/
machine has the advantages of high efficiency, simple process flow, high degree of automation, low price and good quality of rice, and has been widely used by grain processing manufacturers. The problems that may arise during the use of the rice grader complete sets of equipment have caused problems for the users. To help you better solve a series of faults in the complete sets of rice grader, we will analyze the faults for the rest of the contents.
Analysis of the causes of the failure of the rice grader complete equipment:
The complete equipment of the rice grader machine is blocked and the output is reduced. The main reason is that the feed amount is too large, the discharge port pressure is too large or the discharge port is too small; the discharge port is blocked by the rice bran, which may be caused by the belt slippage, the roller wear or the rice knife wear; the raw material moisture is too high or the spiral head Wear and loose.
Rice bran contains rice, too much broken rice. The main reason: the rice sieve is damaged or the joint seam is too large; the conveying head and the sanding roller joint are not flat, the surface of the sanding roller is not smooth; the rice machine outlet is not smooth; the rice knife is too thick, the distance between the roller and the rice knife is too small; the rotation speed is unstable.
The current sudden increase. The main reason is: the feed inlet is broken, the pressure gate is out of order, the rice sieve is broken, the rice sieve bracket is broken; the foreign matter entering the machine or the feed amount is too large; the outlet pressure door is out of order, the rice sieve is blocked, the rice is not smooth; Or the manifold is blocked; the power is out of phase.
The rice grader machine complete equipment body accuracy decreased, uneven white. The main reason: the rice knife is worn; the feed is too small or the discharge pressure is too small.
The complete set of equipment of the drowning rice grader has large vibration and the bearing is hot. The main reason: the shaft or pulley is unbalanced; the anchor bolts are loose; the bearing is filled with too much oil or lack of oil; the lubricating oil is too dirty.
There is abnormal smell. The main reason: the roller is loose or broken; the foreign object is dropped inside the machine; the bearing and the seat are damaged; the belt is slipping; the nut is loose.
The accuracy of the rice grain is not uniform. Replace the roller; use the rice knife to adjust the head, adjust the surface, or replace the rice knife; avoid mixing different types of raw grain together; properly adjust the inlet jaw and the outlet jaw.
To much broken rice. Adjust the gap between the rice knife and the opening of the exit jaw, clean up the accumulated stack; re-adjust the speed of the roller; check the installation of the sieve to ensure the correct installation.
Click Rice Huller https://www.china-zjlg.com/product/mlgq51-semi-pneumatic-rice-huller.html
to learn about more information.